Since there was no change of the result of firing Al2O3 fibers with slower heating rates we (with the supervisor) decided to use a higher rate and check the results.
Using the changed program I put a sample to the furnace.
Kneading of another sample of bare body was done for 5 hours with the EMU Memo which logs the current used during kneading within every one minute period. Cleaning of the machine took about 30 mins.
As today is Friday lab cleaning was done at 2 O' clock.
Friday, January 30, 2009
Thursday, January 29, 2009
Al2O3 Second Firing Results
Al2O3 sintered fibers were taken out from the kiln. But as the problem occurred in the previous firing, after this firing there was no fibers found. Everything is broken into pieces. Have to find a solution for this problem.
Wednesday, January 28, 2009
Kneading Material
For the project Arg, another sample of body should be kneaded with fibers inside 6%. Hence, the kneading was started but after some time it was observed that the kneaded was stopped. There was a problem with the power outlet so that the kneading had to be started from the scratch.
Compression test for the third batch of project MH was done. It showed some interesting results. According to that clay with different kinds of silica had different strengths. According to strength,
1. Double layer Silica
2. Single layer Silica
3. Mixed Silica (Double and Single layer)
Compression test for the third batch of project MH was done. It showed some interesting results. According to that clay with different kinds of silica had different strengths. According to strength,
1. Double layer Silica
2. Single layer Silica
3. Mixed Silica (Double and Single layer)
Tuesday, January 27, 2009
Sample Preparation
In the morning had a meeting with the co-supervisor and granted some work that has to be done within next few days. For one project (Arg) I have to do 3 kneadings.
1. with fibers - 6% - 5 hrs
2. with glass fibers - 6% - 5hrs
3. without fibers - 5 hrs
and also prepare samples for compression test on project MH and help my colleague for that.
So started work with kneading the sample without fibers.
Then sample preparation of MH for the compression test.
In the evening started to clean the small kneader after getting instructions from the co-supervisor.
1. with fibers - 6% - 5 hrs
2. with glass fibers - 6% - 5hrs
3. without fibers - 5 hrs
and also prepare samples for compression test on project MH and help my colleague for that.
So started work with kneading the sample without fibers.
Then sample preparation of MH for the compression test.
In the evening started to clean the small kneader after getting instructions from the co-supervisor.
Monday, January 26, 2009
Spaghetti Production
From the second batch of the Project MH, spaghetti of 1.5 and 0.5 was produced from ES 26g and 52g.
Production of 1.5 mm did not have any problem while 0.5 production (extrusion) had a problem. Time to time the extrusion was stopped because of some granules stuck inside or above the 0.5 die. So it had to be cleaned each and every time it stops making the process longer.
For Al2O3 project another 4 number of samples (fibers) were prepared and put to the furnace using another program which was changed according to the TGA results.
Production of 1.5 mm did not have any problem while 0.5 production (extrusion) had a problem. Time to time the extrusion was stopped because of some granules stuck inside or above the 0.5 die. So it had to be cleaned each and every time it stops making the process longer.
For Al2O3 project another 4 number of samples (fibers) were prepared and put to the furnace using another program which was changed according to the TGA results.
Monday, January 19, 2009
Fiber Project
After doing the sintering process with the fiber specimens, it is realized that there is something wrong either in the firing program or in the material. So a TG (thermogravimetric) analysis had to be done.
I have received the results from the TG analysis and drew the graph according that. There I could obviously see that the firing curve I used was wrong. Because the decomposition of the inner core of the fiber overlaps with the debinding process of the outer layer (The layer which should be remained after sintering).
So I changed the firing curve very carefully considering some factors according to the TG analysis results. I will sinter some more samples very sooner to check the effects.
I have received the results from the TG analysis and drew the graph according that. There I could obviously see that the firing curve I used was wrong. Because the decomposition of the inner core of the fiber overlaps with the debinding process of the outer layer (The layer which should be remained after sintering).
So I changed the firing curve very carefully considering some factors according to the TG analysis results. I will sinter some more samples very sooner to check the effects.
Saturday, January 17, 2009
Getting Better
The fingers which were squeezed in last year just before the Christmas days are now getting better. It seems that I am going to loose the two nails and at the same time coming new nails. Have to be so careful when working, not to stick with anything around. Otherwise the nails will be forcefully removed making a great disaster. ;)
I am really wondering how nicely the human body works. It is wonderful and amazing.
-- cheers
I am really wondering how nicely the human body works. It is wonderful and amazing.
-- cheers
Subscribe to:
Posts (Atom)
