Monday, January 12, 2009

Calibration

The Ditel Micra-M device calibration with the pressure sensors were little bit hard. I had to check each and every point regarding the signal it outputs. After manually selecting the required points using the calibrating device which has a wheel and a meter using which I could give known pressures to the sensor, the data was noted for later use (That is the main purpose of the task)
So 100 bar, 200 bar, 350 bar, 500 bar, 700 bar, 1400 bar pressure sensors were used to the calibration.
Using another device called DaqPRO, the values or the analog output can be calibrated to recieve data on a computer. So it was also done at the same time.

Thw whole day I had to play with the device so in the evening had a little bit ache in the eyes. Now it feels good. :)

Sunday, January 11, 2009

In New Year

In the new year 2009 started to work after the accident I have met with.
But still working only with the computer and preparing a manual for a measuring device used with pressure sensors.

I have to calibrate all the sensors and store those data for later use.
It's fun since I love to work with electronics and computers. Already I have done a rough calibration of two sensors and have to fine tune them.

Finally have to write the manual of the process of calibration.

Thursday, January 1, 2009

Happy New Year

A year has gone like a wind with ups and downs.
This year will be a great, happy and joyous new year for everyone.

-Cheers

Thursday, December 25, 2008

Merry Christmas

Hi all,

Wish you a merry Christmas and Happy New Year.

Ho ho ho... family time. ;)

- Cheers

Wednesday, December 17, 2008

Accident

I met with an accident while I was working at the a of EMPA, Switzerland.
Two of my fingers were squeezed between the cover of a kneader, accidentally loosing the grip of the cover.

So I will be out of work until 5th Jan 2009. Sad about that. Will be alone at home. :(

Tuesday, November 25, 2008

Fibers

Fibers can be made of any material like ceramics, glass, polymers, metals, etc..
They have a huge impact on the modern technology. If emphasized one can say that it can strengthen a composites having fibers in a matrix.

Fiberglass is the most common and a very old application of fibers. Fiberglass is a composite with polymer matrix with glass fiber and thus the name given fiberglass or glass fiber.

Instead of these glass fibers, fibers of others materials mentioned above also can be used to make different materials with different properties and will change the way of the world that exist today.

Wednesday, November 19, 2008

Extrusion of Ceramics

Extrusion is one of the main process and an old process for materials engineers. With extrusion you can make intricate shapes with a plastic paste. Even ceramics can be processed using this method. Someone could think that it is only be done to plastics, but as mentioned above metals and ceramics can also be extruded.

Type of extruder
1. Ram type extruder
2. Screw type extruder

Ceramic extrusion (Considering ram type extruder)
To extrude ceramic into a required shape, one must formulate and create a paste according to his/her requirements. The person should think about its plasticity, viscosity, thixotropy, etc. (basically the rheology of the paste) and the pressure it needs to do a good extrusion, the speed of the extrusion, etc.. It is seen that if there is not enough pressure there will be defects on the extruded parts and also all the other parameters are also very important for the quality of the final product.

--cheers